Coffe Holding Fermentation And Storage Tank

Coffe Holding Fermentation And Storage Tank

Pressure tanks for the coffee holidng and storage,it can also fermentation for the coffee

Features

★Function:Beer maturation/conditioning/serving/filtered beer receiving
★Interior Shell: SUS304 full welded; TH=3mm
★Exterior Shell:SUS304 full welded; TH=2mm
★100% TIG welding with pure argon gas shield
★Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
★Insulation: Polyurethane; TH=80mm
★Glycol Jacket: Dimple plate on side wall
★Stringent tank leakage test by water and pressured gas
★Stringent Jacket leakage test by water and pressured gas
★Dished head and bottom
★Sanitary side mounted manway
★CIP arm with 360° coverage CIP spraying ball
★Full sanitary sampling valve
★Mechanical relief valve 2 bar on CIP arm
★Carbonation port with stone
★Shockproof pressure gauge on CIP arm
★Tri clamp discharge arm with butterfly valve
★Thermowell for high accuracy temperature sensor
★4pcs completely SUS304 heavy duty legs with leveling pad
★Sanitary level tube with stainless steel ball valves
★Complete valves, fittings and all parts

All Construction is from SUS 304 food grade stainless steel, all pipes are SUS304
All signs & wording in English
All tanks to be supplied with Data Plates including Test Data & Serial Number
All tanks will be tested and inspected in the NDT room after construction & Quality Control Checks
All jackets will be tested using water pressure testing, testing pressure: 0.4Mpa (4 Bar) & working pressure:0.2Mpa (2Bar)
All tanks will be pressure tested for 48hours before leaving the ZPET factory;
All the welds are full TIG welded by water spray method to ensure uniform weld pattern with full pickling & passivation
All tanks are mirror polishing inside, to be Ra 0.4um.
All Gaskets are manufactured with EPDM

Payment Term:

T/T transfer, 40% advance payment in order to start production,
T/T transfer 60% before the equipment is shipped.
Alibaba trader assurance is available to guarantee your payment safety.

Delivery Term:

The manufacturing time is 30 – 45 working days, and will be commenced as soon the initial 40% deposit is received in ZPET account and technical drawings are signed & confirmed by the client
The technical files, layouts, drawings and all other technical confirmation time(s) shall not be included in the manufacturing time.

Production will not start until all drawings, technical files or layouts are confirmed & signed by appropriate party. This can lead to delays in production and / or delivery time if not completed.