You are here: Home » Brewery Equipment » Fermenter&Bright Beer Tank » Jacketed Conical Fermenter for Beer Fermentation Tank Made in China

loading

Jacketed Conical Fermenter for Beer Fermentation Tank Made in China

Share to:
wechat sharing button
facebook sharing button
twitter sharing button
line sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
Jacketed Conical Fermenter for Beer Fermentation Tank Made in China
Availability:

Product Description

Jacketed Conical Fermenter for Beer Fermentation Tank Made in China



Utilizing state of the art design and manufacturing, ZPET Brewing and Equipment Company provides a durable, high-quality unitank fermenter. With the use of Polyurethane insulator in the interior of the tank, mirror-polished inner surface, and cooling jacket, our fermenting tanks will provide a superior product for your brewery.

Fermentation in covered cylindrical-conical tanks (CCT or CCF). They are cylindrical vessels with a conical bottom in which are used for primary fermentation (and the further fermentation continues in lager tanks), or the entire fermentation process, including maturation ( lagering tanks are not used). These vessels are the most commonly used types of tanks for beer production.

Compared to traditional open fermentation vats CCT´s have several advantages . Among the most important is high-quality automatic sanitation, the possibility of full automation of the fermentation process (lower labor costs) and less floor space, which fermentation technology occupies ( CCT can also be installed outside the building of the brewery space). Fermentation at a slight overpressure speeds up the fermentation process. The covered fermentation technology prevents contamination by foreign organisms and does not place such a high demands on sterility of the environment as open fermentation in the fermentation vats.

The temperature of the liquid in the CC tanks is maintained by using different coolant as needed in several cooling zones.

Fermentation Tanks

Standard Configuration

Function:Wort Fermentation or maturation
Tank Capacity:800L (+25% Headspace minimum)
Dimension: φ1160×2400mm
Interior Shell: SUS304 full welded; TH=3mm
Exterior Shell:SUS304 full welded; TH=2mm
100% TIG welding with pure argon gas shield
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Insulation: Polyurethane; TH=80mm
Glycol Jacket: Dimpled plate on cone and side
Stringent tank leakage test by water and pressured gas
Stringent Jacket leakage test by water and pressured gas
Dished head and 60 degree cone bottom
Sanitary Side mounted manway
CIP arm with 360° coverage CIP spraying ball
Full sanitary sampling valve
Mechanical relief valve 2 bar on CIP arm
Shockproof pressure gauge on CIP arm
Rotating racking arm and port on cone with butterfly valve
Tri clamp discharge arm with butterfly valve
Thermowell for high accuracy temperature sensor
3pcs completely SUS304 heavy duty legs with leveling pad and legs support
Complete valves, fittings and all parts
Level tube for special request
Carbonation port and stone for special request

Product Video

Jacketed Conical Fermenter for Beer Fermentation Tank Made in China

Product Advantage

Jacketed Conical Fermenter for Beer Fermentation Tank Made in China

All Construction is from SUS 304 food grade stainless steel, all pipes are SUS304
All signs & wording in English
All tanks to be supplied with Data Plates including Test Data & Serial Number
All tanks will be tested and inspected in the NDT room after construction & Quality Control Checks
All jackets will be tested using water pressure testing, testing pressure: 0.4Mpa (4 Bar) & working pressure:0.2Mpa (2Bar)
All tanks will be pressure tested for 48hours before leaving the ZPET factory;
All the welds are full TIG welded by water spray method to ensure uniform weld pattern with full pickling & passivation
All tanks are mirror polishing inside, to be Ra 0.4um.
All Gaskets are manufactured with EPDM

Trading Terms

Jacketed Conical Beer Fermentation Tank Beer Fermenter for Sale

Payment Term:

T/T transfer, 40% advance payment in order to start production,
T/T transfer 60% before the equipment is shipped.
Alibaba trader assurance is available to guarantee your payment safety.


Delivery Term:

The manufacturing time is 30 – 45 working days, and will be commenced as soon the initial 40% deposit is received in ZPET account and technical drawings are signed & confirmed by the client
The technical files, layouts, drawings and all other technical confirmation time(s) shall not be included in the manufacturing time.

Production will not start until all drawings, technical files or layouts are confirmed & signed by appropriate party. This can lead to delays in production and / or delivery time if not completed.

Previous: 
Next: 
ZPET has distinguished itself as the Asia brewing equipment manufacturer.

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

 Shun hua Road, Lixia District, Jinan City, Shandong Province, China
  allen2712
Copyright   2021 Shandong ZhongPi Machinery Equipment Co.,Ltd.  Support by  Sdzhidian   Sitemap